All posts by webmaster

SPC1152 – Mounting Panel for DSUB15 Connectors (2x)

Uncategorized

Features

  • Standard 3U (128.4 mm) panel
  • Complies with IEC 60297-3-101
  • Small occupied width : 20 mm (4HP)
  • Accepts two DSUB15 connectors
  • Ideal for rapid prototyping

Overview

The SPC1000-Series panels allow the user to connect multiple electrical signals to a standard case through DSUB connectors. Both standard and mixed contact connectors are accepted. These panels can be both mounted on the front or the rear side of the case.

Download

Additional Views

Example of use : two DSUB15 female connectors are mounted on the SPC1152 panel.

See Also

SPC1092 – Mounting Panel for DSUB9 Connectors (2x)

Uncategorized

Features

  • Standard 3U (128.4 mm) panel
  • Complies with IEC 60297-3-101
  • Small occupied width : 20 mm (4HP)
  • Accepts two DSUB9 connectors
  • Ideal for rapid prototyping

Overview

The SPC1000-Series panels allow the user to connect multiple electrical signals to a standard case through DSUB connectors. Both standard and mixed contact connectors are accepted. These panels can be both mounted on the front or the rear side of the case.

Download

Additional Views

Example of use : two DSUB9 female connectors are mounted on the SPC1092 panel.

See Also

SPC1091 – Mounting Panel for DSUB9 Connector

Uncategorized

Features

  • Standard 3U (128.4 mm) panel
  • Complies with IEC 60297-3-101
  • Small occupied width : 20 mm (4HP)
  • Accepts one DSUB9 connector
  • Ideal for rapid prototyping

Overview

The SPC1000-Series panels allow the user to connect multiple electrical signals to a standard case through DSUB connectors. Both standard and mixed contact connectors are accepted. These panels can be both mounted on the front or the rear side of the case.

Download

Additional Views

Example of use : one DSUB9 female connector is mounted on the SPC1091 panel.

See Also

SPC610 – FC/(A)PC to FC/(A)PC adapters

Uncategorized

Features

  • Standard 3U (128.4 mm) panel
  • Complies with IEC 60297-3-101
  • Small occupied width : 20 mm (4HP)
  • Accepts FC/PC and FC/APC adapters (4x)
  • Ideal for rapid prototyping

Overview

The SPC600-Series panels allow the user to connect optical fibers to a standard case through specific mating sleeves.  These panels can be both mounted on the front or the rear side of the case.

Up to four FC/PC to FC/PC and FC/APC to FC/APC adapters can be mounted on the same SPC610 panel.

Download

Additional Views

Example of use : four FC/APC to FC/APC adapters are mounted of the SPC610 panel.

See Also